RENTAL

CAMERA EQUIPMENT BY FOOKUS POOKUS

DJI Focus Pro Combo

DJI Focus Pro rental for LiDAR autofocus and wireless follow focus with compatible manual and cine lenses. Suitable for configured ARRI, Sony FX and Blackmagic URSA/PYXIS camera setups. Includes LiDAR, Grip, Motor, Hand Unit and monitor mounting adapters. High-Bright Remote Monitor available separately.

Description

DJI Focus Pro Rental — LiDAR Autofocus & Wireless Follow Focus

Our DJI Focus Pro rental package brings LiDAR-assisted autofocus, manual lens control and a wireless focus-puller workflow to compatible camera setups. The All-In-One Combo includes the LiDAR, Grip, Motor and Hand Unit, together with adapters for mounting a DJI High-Bright Remote Monitor or a third-party monitor.

Use it for solo operation, moving shots, interviews, documentaries and productions where a camera operator and focus puller work together.

Add LiDAR Autofocus to Manual Cine Lenses

Focus Pro measures subject distance with its LiDAR sensor and uses an external motor to turn the lens’s focus ring. This allows suitable manual lenses to gain autofocus without relying on the camera body’s own autofocus system.

The system can be rigged with ARRI cinema cameras, Sony FX-series cameras and Blackmagic URSA or PYXIS bodies, depending on the selected lens and mounting arrangement. It is particularly useful when working with mechanically coupled manual cine lenses.

Compatibility depends on accessible lens gearing, motor fit, adequate mounting support and lens calibration. Camera start/stop control has separate, model-specific compatibility requirements.

Autofocus, Manual Focus and AMF

Choose autofocus for subject following, manual focus for deliberate pulls, or Automated Manual Focus—AMF—for a combination of automatic assistance and operator intervention.

In AMF mode, the control dial follows autofocus movement, providing tactile feedback and allowing the operator to intervene when the shot requires a different focus decision.

LiDAR Subject Recognition

The Focus Pro LiDAR uses 76,800 ranging points and recognises human subjects and vehicles. Its focusing range extends from approximately 0.5–10 m in the standard 1× mode, with up to 20 m available when the Grip’s 2× zoom display is enabled.

Accurate results depend on correct lens calibration, sensor positioning and shooting conditions.

Wireless Follow Focus for a Dedicated Focus Puller

The Focus Pro Hand Unit provides a focus wheel, iris slider and zoom control, with adjustable damping and electronic A/B points.

One Focus Pro Motor is included in this rental kit. For a conventional manual lens, simultaneous motorised control of separate focus, iris and zoom rings requires additional motors.

DJI specifies a Hand Unit-to-Motor range of up to 100 m under CE regulations, or 160 m under FCC regulations, in unobstructed conditions without interference.

DJI and Third-Party Monitor Mounts Included

The kit includes the DJI High-Bright Remote Monitor Holder and its third-party monitor adapter. These allow the focus puller to combine the Hand Unit with a suitable monitor, including compatible SmallHD models, for viewing the image while adjusting focus.

The DJI High-Bright Remote Monitor itself is an optional add-on.

The holder provides physical mounting; the camera image requires an appropriate wired or wireless video connection. Wireless viewing with the DJI monitor requires a compatible DJI video-transmission setup.

Use with DJI Ronin 4D and Flex

The Focus Pro Hand Unit can also be used with the DJI Ronin 4D and Ronin 4D Flex through the High-Bright Remote Monitor and compatible transmission configuration. This allows the camera operator to concentrate on framing and movement while a second crew member handles focus.

Key Specifications

Feature Specification
Focus modes AF, MF and AMF
LiDAR ranging points 76,800
Standard focusing range Approximately 0.5–10 m
Extended focusing range Up to 20 m with 2× zoom display enabled
Subject recognition Humans and vehicles
Wireless Hand Unit-to-Motor range Up to 100 m CE / 160 m FCC, unobstructed
Motor mounting 15 mm rod
Motor gear 0.8 MOD
Maximum motor torque 0.6 N·m at 8 V
Grip display 1.8-inch colour touchscreen
Motors supplied One
Monitor mounting DJI holder and third-party adapter included
High-Bright Remote Monitor Optional add-on

Included Rental Equipment

Core units

  • 1 × DJI Focus Pro LiDAR
  • 1 × DJI Focus Pro Grip
  • 1 × DJI Focus Pro Motor
  • 1 × DJI Focus Pro Hand Unit
  • 1 × Carrying Case

Monitor mounting

  • 1 × DJI High-Bright Remote Monitor Holder
  • 1 × Third-Party Monitor Adapter Bracket
  • Associated mounting hardware

Power, cables and rigging accessories

  • 1 × BG21 Battery Grip
  • 2 × NP-F550 Battery
  • 1 × Dual-Slot Battery Charger
  • 2 × Multi-Camera Control Cable — USB-C, 30 cm
  • 1 × USB-C Charging Cable — 40 cm
  • 1 × D-Tap to USB-C Power Cable — 50 cm
  • 1 × NATO Mount Adapter
  • 1 × Side Rail Rod Adapter
  • 1 × Horizontal Side Rail Adapter

Optional Add-On

  • DJI High-Bright Remote Monitor

Send us your camera body, lens model and preferred operating configuration so we can help plan the mounting, calibration and monitoring setup for your DJI Focus Pro rental.

Quote request cart0
There are no products in the cart!
Continue shopping
0