Description
DJI Focus Pro Rental — LiDAR Autofocus & Wireless Follow Focus
Our DJI Focus Pro rental package brings LiDAR-assisted autofocus, manual lens control and a wireless focus-puller workflow to compatible camera setups. The All-In-One Combo includes the LiDAR, Grip, Motor and Hand Unit, together with adapters for mounting a DJI High-Bright Remote Monitor or a third-party monitor.
Use it for solo operation, moving shots, interviews, documentaries and productions where a camera operator and focus puller work together.
Add LiDAR Autofocus to Manual Cine Lenses
Focus Pro measures subject distance with its LiDAR sensor and uses an external motor to turn the lens’s focus ring. This allows suitable manual lenses to gain autofocus without relying on the camera body’s own autofocus system.
The system can be rigged with ARRI cinema cameras, Sony FX-series cameras and Blackmagic URSA or PYXIS bodies, depending on the selected lens and mounting arrangement. It is particularly useful when working with mechanically coupled manual cine lenses.
Compatibility depends on accessible lens gearing, motor fit, adequate mounting support and lens calibration. Camera start/stop control has separate, model-specific compatibility requirements.
Autofocus, Manual Focus and AMF
Choose autofocus for subject following, manual focus for deliberate pulls, or Automated Manual Focus—AMF—for a combination of automatic assistance and operator intervention.
In AMF mode, the control dial follows autofocus movement, providing tactile feedback and allowing the operator to intervene when the shot requires a different focus decision.
LiDAR Subject Recognition
The Focus Pro LiDAR uses 76,800 ranging points and recognises human subjects and vehicles. Its focusing range extends from approximately 0.5–10 m in the standard 1× mode, with up to 20 m available when the Grip’s 2× zoom display is enabled.
Accurate results depend on correct lens calibration, sensor positioning and shooting conditions.
Wireless Follow Focus for a Dedicated Focus Puller
The Focus Pro Hand Unit provides a focus wheel, iris slider and zoom control, with adjustable damping and electronic A/B points.
One Focus Pro Motor is included in this rental kit. For a conventional manual lens, simultaneous motorised control of separate focus, iris and zoom rings requires additional motors.
DJI specifies a Hand Unit-to-Motor range of up to 100 m under CE regulations, or 160 m under FCC regulations, in unobstructed conditions without interference.
DJI and Third-Party Monitor Mounts Included
The kit includes the DJI High-Bright Remote Monitor Holder and its third-party monitor adapter. These allow the focus puller to combine the Hand Unit with a suitable monitor, including compatible SmallHD models, for viewing the image while adjusting focus.
The DJI High-Bright Remote Monitor itself is an optional add-on.
The holder provides physical mounting; the camera image requires an appropriate wired or wireless video connection. Wireless viewing with the DJI monitor requires a compatible DJI video-transmission setup.
Use with DJI Ronin 4D and Flex
The Focus Pro Hand Unit can also be used with the DJI Ronin 4D and Ronin 4D Flex through the High-Bright Remote Monitor and compatible transmission configuration. This allows the camera operator to concentrate on framing and movement while a second crew member handles focus.
Key Specifications
| Feature | Specification |
|---|---|
| Focus modes | AF, MF and AMF |
| LiDAR ranging points | 76,800 |
| Standard focusing range | Approximately 0.5–10 m |
| Extended focusing range | Up to 20 m with 2× zoom display enabled |
| Subject recognition | Humans and vehicles |
| Wireless Hand Unit-to-Motor range | Up to 100 m CE / 160 m FCC, unobstructed |
| Motor mounting | 15 mm rod |
| Motor gear | 0.8 MOD |
| Maximum motor torque | 0.6 N·m at 8 V |
| Grip display | 1.8-inch colour touchscreen |
| Motors supplied | One |
| Monitor mounting | DJI holder and third-party adapter included |
| High-Bright Remote Monitor | Optional add-on |
Included Rental Equipment
Core units
- 1 × DJI Focus Pro LiDAR
- 1 × DJI Focus Pro Grip
- 1 × DJI Focus Pro Motor
- 1 × DJI Focus Pro Hand Unit
- 1 × Carrying Case
Monitor mounting
- 1 × DJI High-Bright Remote Monitor Holder
- 1 × Third-Party Monitor Adapter Bracket
- Associated mounting hardware
Power, cables and rigging accessories
- 1 × BG21 Battery Grip
- 2 × NP-F550 Battery
- 1 × Dual-Slot Battery Charger
- 2 × Multi-Camera Control Cable — USB-C, 30 cm
- 1 × USB-C Charging Cable — 40 cm
- 1 × D-Tap to USB-C Power Cable — 50 cm
- 1 × NATO Mount Adapter
- 1 × Side Rail Rod Adapter
- 1 × Horizontal Side Rail Adapter
Optional Add-On
- DJI High-Bright Remote Monitor
Send us your camera body, lens model and preferred operating configuration so we can help plan the mounting, calibration and monitoring setup for your DJI Focus Pro rental.
